Cart 0
వర్షపు నీటిలో దాగిఉన్నమర్మం ఏమిటి? great things behind the creation of rain water by sun god
Rainwater harvesting provides an independent water supply during regional water restrictions and in developed countries is often used to supplement the main supply. It provides water when there is a drought, can help mitigate flooding of low-lying areas, and reduces demand on wells which may enable groundwater levels to be sustained. It also helps in the availability of potable water as rainwater is substantially free of salinity and other salts. Application of rainwater harvesting in urban water system provides a substantial benefit for both water supply and wastewater subsystems by reducing the need for clean water in water distribution system, less generated stormwater in sewer system,[1] as well as a reduction in stormwater runoff polluting freshwater bodies.
There has been a large body of work focused on the development of Life Cycle Assessment and Life Cycle Costing methodologies to assess the level of environmental impacts and money that can be saved by implementing rainwater harvesting systems.
More development and knowledge is required to understand the benefits rainwater harvesting can provide to agriculture. Many countries especially those with an arid environment use rainwater harvesting as a cheap and reliable source of clean water.[2] To enhance irrigation in arid environments, ridges of soil are constructed in order to trap and prevent rainwater from running down hills and slopes. Even in periods of low rainfall, enough water is collected in order for crops to grow.[3] Water can be collected from roofs, dams, and ponds can be constructed in order to hold large quantities of rainwater so that even on days where there is little to no rainfall, there is enough available to irrigate crops.[3]
Quality[edit]
The concentration of contaminants is reduced significantly by diverting the initial flow of run-off water to waste.[4] Improved water quality can also be obtained by using a floating draw-off mechanism (rather than from the base of the tank) and by using a series of tanks, withdraw from the last in series. Pre-filtration is a common practice used in the industry to ensure that the water entering the tank is free of large sediment. Pre-filtration is important to keep the system healthy.
Conceptually, a water supply system should match the quality of water with the end use. However, in most of the developed world high quality potable water is used for all end uses. This approach wastes money and energy and imposes unnecessary impacts to the environment. Supplying rainwater that has gone through preliminary filtration measures for non-potable water uses, such as toilet flushing, irrigation, and laundry, may be a significant part of a sustainable water management strategy.
System setup[edit]
Rainwater harvesting systems can range in complexity, from systems that can be installed with minimal skills, to automated systems that require advanced setup and installation. The basic Rainwater harvesting system is more of a plumbing job than a technical job as all the outlets from the building terrace are connected through a pipe to an underground tank that stores water.
Systems are ideally sized to meet the water demand throughout the dry season since it must be big enough to support daily water consumption. Specifically, the rainfall capturing area such as a building roof must be large enough to maintain adequate flow. The water storage tank size should be large enough to contain the captured water.[citation needed]
For low-tech systems, there are many low-tech methods used to capture rainwater: rooftop systems, surface water capture, and pumping the rainwater that has already soaked into the ground or captured in reservoirs and storing it into tanks (cisterns).
Before a rainwater harvesting system is built, it is helpful to use digital tools. For instance, if you want to detect if a region has a high rainwater harvesting potential, rainwater harvesting GIS maps can be made using an online interactive tool. Or if you need to estimate how much water is needed to fulfill a community’s water needs, the Rain is Gain tool helps with this. Tools like these can save time and money before a commitment to build a system is undertaken, in addition to making the project sustainable and last a long time.